AD7710ANZ

AD7710 is a signal conditioning ADC, this is a complete analogue front end for low frequency measurement applications. The device accepts low level signals directly from a strain gauge or transducer and outputs a serial digital word. It employs a sigma-delta conversion technique to realize up to 24bit of no missing codes performance. The input signal is applied to a proprietary programmable gain front end based around an analogue modulator. The modulator output is processed by an on-chip digital filter. The first notch of this digital filter can be programmed via the on-chip control register, allowing adjustment of the filter cutoff and settling time. It is suitable for use in weigh scales, thermocouples, process control, smart transmitters, chromatography applications.

• Charge balancing ADC: 24 bits, no missing codes, 0.0015% nonlinearity
• 2-channel programmable gain front end: gains from 1 to 128, differential inputs
• Low-pass filter with programmable filter cutoffs
• Ability to read/write calibration coefficients
• Bidirectional microcontroller serial interface
• Internal/external reference option
• Power dissipation: typically 25mW (normal mode)
• Power dissipation: typically 7mW (standby (power-down) mode)
• 24 lead PDIP package
• Operating temperature range from -40°C to +85°C

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party