You have entered a value in the highlighted fields below that contain invalid characters. Please revise your selection using valid characters only.
Product may not be an exact match for your search
You previously purchased this product.
View in Order History
ACC15
Coating, Silicone, Pale Yellow, Bottle
- Manufacturer:
- CHT CHT
- Manufacturer Part No:
- ACC15
- Order Code:
- 1971829
- Technical Datasheet:
- ACC15 Datasheet
Product Information
Technical Documents (2)
CAD Downloads
--Please select...
✔
--Please select...
×
Terms and Conditions
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
Product Overview
ACC15 is a low viscosity, 1-component, condensation curing silicone conformal coating. This uncured product can be applied by pouring or brushing and is readily cured to a tough, transparent rubber. It can be used to coat printed circuit boards to prevent ingress of water and environmental contaminants. Bulk product may be poured or brushed onto the circuit. Pouring or brushing will give a film thickness of 100 to 1000microns. This product contains an UV trace to allow inspection of the board after coating to ensure complete and even coverage. Boards should be thoroughly cleaned before coating for best adhesion/performance. Coating over no clean fluxes is possible so long as other surface contaminants are not present.
- Room temperature cure or mild heat acceleration at 60°C
- 100% solids, low odour
- UL listed file number E493561
- Fluorescent UV aid for production QA checks, excellent adhesion to many substrates
- Colour is translucent pale yellow
- Appearance is liquid, weight is 1kg
- Flash point is >150°C (ASTM D93)
- Service temperature is -55°C to 200°C
- Density is at 25°C is 1.02g/ml (ASTM D70)
No Longer Manufactured
Rs.20,307.06
Pricing is unavailable. Please contact customer services.
- Price for:
- Each
Multiple: 1 Minimum: 1
Total Price:
Total Price: ( )
Total Price: --
Filter Tool