FLUKE-700HTH-1

FLUKE-700HTH-1 is a hydraulic test hose. It is a 10,000 psi, 690 bar working pressure test hose that features stainless steel and nylon construction for use in connecting a Fluke-700HTP-1 or other hydraulic test pump to a unit under test. The Fluke 700HTH-1 allows connection to both a Fluke pressure module and a calibration unit under test from a Fluke 700HTP-1 hydraulic test pump simultaneously. The 700HTH-1 is compatible with water and non-corrosive oil.

• Hose and fittings connect directly to the Fluke 700HTP-1 test pressure port
• 60mm/2.36inch minimum bend radius
• Working temperature range from - 40⁰C to + 120⁰C
• Includes plugs and caps to eliminate fluid loss in hose, eliminates the need to re-prime the hose
• Self-sealing fittings with easy finger tight connections
• Low volumetric expansion and a negligible pressure drop at rated pressures

Contents

Hose with M16X2.0 connectors, 2 2/4” male NPT to M16X2.0 connectors, 1 x adapter (1/4 in NPT female to 1/4 in BSP male), Instruction sheet.

Warnings

Unlock more info! Copy and paste this link: www.fluke.co.uk/freegift

Notes

PROMOTION: BUY ONE GET ONE FREE, valid until 31st July 2025 (EUROPE only). Redeem your gift from Fluke. For more information, please refer to the Promotion document on this page or visit Fluke storefront.