STM32U073KCU6

STM32U073KCU6 is an ultra-low power Arm®-based 32bit microcontroller. This device embeds high-speed memories (up to 256Kbyte flash memory) and an extensive range of enhanced I/Os and peripherals connected to APB and AHB buses, and a 32bit multi-AHB bus matrix. It also embeds protection mechanisms for embedded flash memory and SRAM, such as readout protection and write protection. This device offers a 12-bit ADC, a 12-bit DAC, two embedded rail-to-rail analogue comparators, one operational amplifier, a low-power RTC, one general-purpose 32bit timer, one 16-bit PWM timer dedicated to motor control, three general-purpose 16-bit timers, and three 16-bit low-power timers. It also features standard and advanced communication interfaces, namely four I2Cs, three SPIs, four USARTs and three low-power UARTs, plus one crystal-less USB full-speed device.

• 256Kbytes of flash memory, 1.71V to 3.6V power supply
• 32bit Arm® Cortex®-M0+ CPU, frequency up to 56MHz
• 1Kbyte instruction cache allowing 0-wait-state execution from flash memory
• True random number generation, candidate for NIST SP 800-90B certification
• Candidate for Arm® PSA level 1 and SESIP level 3 certifications, 5 passive anti-tamper pins
• 4 to 48MHz crystal oscillator, internal 16MHz factory-trimmed RC (±1%)
• Voltage noise density is 500nV/√Hz typical at (1KHz, output loaded with 4Kohm)
• Gain bandwidth product is 1600KHz typical at (VDDA ≥ 2.4V, (OPA-RANGE = 1))
• Input offset voltage is ±1.5mV maximum
• Industrial temperature range from -40°C to 85°C, 32-pin UFQFPN package