NE5534P

The NE5534P is a high-performance low-noise high-speed audio Operational Amplifier, combines excellent DC and AC characteristics. Some of the features include very low noise, high output-drive capability, high unity-gain and maximum-output-swing bandwidths, low distortion and high slew rate. This operational amplifier is compensated internally for a gain equal to or greater than three. Optimization of the frequency response for various applications can be obtained by use of an external compensation capacitor between COMP and COMP/BAL. The device features input-protection diodes, output short-circuit protection and offset-voltage nulling capability with use of the BALANCE and COMP/BAL pins. For the NE5534A and SA5534A devices, a maximum limit is specified for the equivalent input noise voltage.

• 3.5nV/√Hz Typical equivalent input noise voltage
• 10MHz Typical unity-gain bandwidth
• 100dB Typical common-mode rejection ratio
• 100V/mV Typical high DC voltage gain
• Peak-to-peak output voltage swing 32V typical
• With VCC± = ±18V and RL = 600Ω
• 13V/µs Typical high slew rate
• ±3 to ±20V Wide supply-voltage range
• Low harmonic distortion
• Offset nulling capability
• External compensation capability

Applications

Audio, Signal Processing, Medical, Communications & Networking

Warnings

Device has limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.

Notes

Device has limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.