MAX31825ANT+

MAX31825ANT+ is a 1-Wire® temperature sensor with ±1°C accuracy. The sensor communicates over a 1-Wire® bus that, by definition, requires only one data line (and ground) for communication with a microcontroller. This sensor has a unique 64-bit serial code, which allows multiple MAX31825 ICs to reside on the same 1-Wire bus. In addition, it includes two address input pins that, using an external resistor and pin-strapping, allow one of 64 different addresses to be selected to identify each sensor's physical location. Therefore, it is simple to use one microprocessor to control many devices distributed over a large area. It is used in applications such as industrial equipment, communications equipment, data centre equipment, consumer equipment.

• 1-Wire interface requires only one port pin for communication
• Unique 64-bit serial code stored in an on-board ROM
• Alarm output for detection of temperature faults
• User-definable alarm settings, 4kV HBM ESD protection
• Power supply voltage range from 1.6V to 3.6V
• Standby supply current is 2.5µA typical at (TA = -40°C to +125°C)
• DQ capacitance is 25pF maximum at (TA = -40°C to +125°C, VDD = 1.6V to 3.6V)
• Conversion power supply current is 80µA typical at (TA = -40°C to +125°C, VDD = 1.6V to 3.6V)
• Operating temperature range from -40°C to +125°C
• 6-pin WLP package

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party