ADCMP582BCPZ-R2

ADCMP582 is a ultrafast voltage comparator fabricated on the Analog Devices, Inc. proprietary XFCB3 silicon germanium (SiGe) bipolar process. It features reduced swing PECL (positive ECL) output drivers. The ±5V power supplies enable a wide -2V to +3V input range with logic levels referenced to the CML/NECL/PECL outputs. The inputs have 50 ohm on-chip termination resistors with the optional capability to be left open (on an individual pin basis) for applications requiring high impedance input. The CML output stage is designed to directly drive 400mV into 50 ohm transmission lines terminated to ground. The NECL output stages are designed to directly drive 400mV into 50 ohm terminated to -2V. It is used in applications such as automatic test equipment (ATE), high speed instrumentation, pulse spectroscopy, medical imaging and diagnostics, high speed line receivers, threshold detection, peak and zero-crossing detectors, high speed trigger circuitry, clock and data signal restoration.

• On-chip terminations at both input pins, resistor-programmable hysteresis
• Differential latch control, slew rate dispersion is 15ns typical at (TA = 25°C)
• Propagation delay is 180ps typical at (VOD = 500mV, TA = 25°C)
• Equivalent input bandwidth is 8GHz typical at (0.0V to 400mV input, TA = 25°C)
• Latch minimum pulse width is 100ps typical at (VOD = 200mV, TA = 25°C)
• Rise/fall time is 37ps typical at (VCCI = 5V; VEE = -5V)
• Deterministic jitter is 15ps typical at (VCCI = 5V; VEE = -5V)
• RMS random jitter is 0.2ps typical at (TA = 25°C)
• Operating temperature is -40°C to +125°C
• Package style is 16-lead lead frame chip scale [LFCSP]

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party