TMC5272-EVAL-KIT

TMC5272-EVAL-KIT is an evaluation kit including TMC5272 evaluation board, Landungsbruecke and Eselsbruecke board. The TMC5272-EVAL allows evaluation of the TMC5272 in combination with the TRINAMIC evaluation board system, or as stand-alone-board. It uses the standard schematic and offers several options in order to test different modes of operation. The TMC5272 is a step/dir driver for two-phase bipolar stepper motor up to 0.8 A (RMS) (1.12 A (PEAK)). Typical applications include wearables, personal portable devices, optical systems, lens control, CCTV, security, insulin pumps, liquid handling, small printing devices, lab and office automation and space constrained applications.

• Supply voltage range from 2.1V to 20V DC
• SPI and single wire UART
• Encoder interface and reference switch input
• 1 to 256 microsteps
• StealthChop2 silent PWM mode
• StallGuard4 sensorless motor load detection
• TriCoder sensorless standstill steploss detection and full step encoder
• 140mm x 85mm size

Contents

TMC5272 evaluation board, Landungsbruecke (interface board to a PC), Eselsbruecke (bridge connector board).