LM5001SD/NOPB

The LM5001SD/NOPB is a non-synchronous Switch-mode Regulator features all of the functions necessary to implement efficient high-voltage Boost, Flyback, SEPIC and Forward converters, using few external components. This easy-to-use regulator integrates a 75V N-channel MOSFET with a 1A peak current limit. Current mode control provides inherently simple loop compensation and line-voltage feed-forward for superior rejection of input transients. The switching frequency is set with a single resistor and is programmable up to 1.5MHz. The oscillator can also be synchronized to an external clock. Additional protection features include current limit, thermal shutdown, under-voltage lockout and remote shutdown capability.

• AEC-Q100 Qualified
• Ultra-wide input voltage range
• Integrated high voltage bias regulator
• Adjustable output voltage
• 1.5% Output voltage accuracy
• Wide bandwidth error amplifier
• Integrated current sensing and limiting
• Integrated slope compensation
• 85% Maximum duty cycle limit
• Single resistor oscillator programming
• Oscillator synchronization capability
• Enable/under-voltage lockout (UVLO) Pin
• Thermal shutdown
• Green product and no Sb/Br

Applications

Power Management, Automotive, Communications & Networking

Warnings

This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.