TPL0102-100RUCR

The TPL0102-100RUCR is a two linear-taper Digital Potentiometer with 256 wiper positions. It can be used as a three-terminal potentiometer or as a two-terminal rheostat. The TPL0102-100 has an end-to-end resistance of 100kΩ. The TPL0102 has non-volatile memory (EEPROM) which can be used to store the wiper position. This is beneficial because the wiper position is stored even during power-off and is automatically reinstated after power-on. The internal registers of the TPL0102 can be accessed using the I²C interface.

• Non-volatile memory stores wiper settings
• Fast Power-up Response Time to Wiper
• 4ppm/°C Ratiometric temperature coefficient
• I²C Compatible serial interface
• Shutdown mode
• ESD performance tested Per JESD 22
• Green product and no Sb/Br

Applications

Power Management, Sensing & Instrumentation

Warnings

Device has limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.