IRH-24/10.5-W80NB-C

IRH-24/10.5-W80NB-C is a 250W IRH-W80 series ultra-wide input encapsulated half-brick isolated DC-DC converter. The industry standard half-brick package offers high-efficiency levels. The fully isolated DC-DC module accepts a wide input voltage range while maintaining a fully regulated single output. The output voltage features overvoltage, overcurrent, short circuit, and over-temperature protection. Other features include adjustable under-voltage lockout protection, adjustable current limit threshold, positive or negative logic enable, and a Hold-Up pin to allow connection of an external capacitor. Certified to UL-60950-1, CAN/CSA C22.2 60950-1, 2nd edition.

• Operating input voltage range from 16 to 160V, 10:1 input voltage range
• Nominal output voltage is 24VDC (set point, Vin=72V, Io=0A, Ta=25°C)
• Operating output current is 10.5A(max), efficiency is 90% (Vin=72V, 100% load)
• Positive on/off logic, baseplate, Vout trim, reinforced insulation, threaded hole mounting baseplate
• Hold up time (10-30mS)
• UVLO set up (resistor programmable), conformally coated PCB
• Encapsulated for harsh environment, reinforced isolation
• Typical isolation is 4242VDC (input to output), typical switching frequency is 240KHz
• Operating ambient temperature range from -40 to 85°C
• Outline dimension (L x W x H) is 63.20 x 60.70 x 14mm, copper alloy through hole pin material