AD5665RBRUZ-1

AD5665 is a nanoDAC® low power quad buffered voltage-out DAC with/without an on-chip reference. All devices operate from a single 2.7V to 5.5V supply, is guaranteed monotonic by design, and have an I²C-compatible serial interface. This has an on-chip reference. The on-chip reference is off at power-up, allowing the use of an external reference. The internal reference is enabled via a software write. This requires an external reference voltage to set the output range of the DAC. The device incorporates a power-on reset circuit that ensures that the DAC output powers up to 0 V (POR = GND) or midscale (POR = VDD) and remains there until a valid write occurs. The on-chip precision output amplifier enables rail-to-rail output swing. Application includes process control, data acquisition systems, portable battery-powered instruments, digital gain and offset adjustment, programmable voltage and current sources, programmable attenuators.

• Low power, smallest pin-compatible, quad nanoDACs
• Guaranteed monotonic by design, power-on reset to zero scale/midscale
• Per channel power-down, hardware LDAC (active low) and CLR functions (active low)
• Resolution is 16bits (min, VDD = 2.7V to 5.5V)
• Relative accuracy is ±8LSB (typ, VDD = 2.7V to 5.5V)
• Offset error is ±1mV (typ, VDD = 2.7V to 5.5V)
• Gain error is ±0.1% FSR (typ, VDD = 2.7V to 5.5V)
• Gain temperature coefficient is ±2.5ppm (typ, of FSR/°C, VDD = 2.7V to 5.5V)
• DC power supply rejection ratio is -100dB (typ, DAC code = midscale, VDD = 5V ± 10%)
• 14 lead TSSOP package, operating temperature range from -40°C to +105°C

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party