AD5755-1ACPZ-REEL7

AD5755-1 is a quad channel, 16bit, serial input, 4mA to 20mA and voltage output DAC, dynamic power control, HART connectivity that operates with a power supply range from -26.4V to +33V. On-chip dynamic power control minimizes package power dissipation in current mode. This is achieved by regulating the voltage on the output driver from 7.4V to 29.5V using a dc-to-dc boost converter optimized for minimum on-chip power dissipation. Each channel has a corresponding CHART pin so that HART signals can be coupled onto the current output of the AD5755-1. The device uses a versatile 3-wire serial interface that operates at clock rates of up to 30 MHz and is compatible with standard SPI, QSPI™, MICROWIRE™, DSP, and microcontroller interface standards. Application includes process control, actuator control, programmable logic controllers (PLCs), HART network connectivity.

• 16-bit resolution and monotonicity
• Dynamic power control for thermal management
• Current and voltage output pins connectable to a single terminal
• User programmable offset and gain, on-chip diagnostics
• Output voltage range from 0V to 5V (AVDD = VBOOST-x = 15V, AVSS = -15 V/0V)
• Total unadjusted error range from +0.04% FSR maximum (AVDD = VBOOST-x = 15V, AVSS = -15 V/0V)
• Relative accuracy (INL) is ±0.0012% FSR typical (0 to 5V, 0 to 10V, ±5V, ±10V ranges)
• Differential nonlinearity (DNL) is +1LSB maximum (guaranteed monotonic)
• Gain error is +0.07% FSR maximum (AVDD = VBOOST-x = 15V, AVSS = -15V/0V)
• 64 lead LFCSP package, operating temperature range from -40°C to +105°C

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party