AD9139BCPZ

AD9139 is an 16bit, high dynamic range digital-to-analogue converter (DAC) that provides a sample rate of 1600MSPS, permitting a multicarrier generation up to the Nyquist frequency. The AD9139 TxDAC+® includes features optimized for wideband communication applications, including 1× and 2× interpolation, a delay locked loop (DLL) powered high speed interface, sample error detection, and parity detection. A 3-wire serial port interface provides for the programming/readback of many internal parameters. A full-scale output current can be programmed over a range of 9mA up to 33mA. Application includes wireless communications: 3G/4G and MC-GSM base stations, wideband repeaters, software defined radios, wideband communications: point-to-point, LMDS/MMDS, transmit diversity/MIMO, instrumentation, automated test equipment.

• Selectable 1× or 2× interpolation filter
• Support input signal bandwidth up to 575MHz
• Very small inherent latency variation <lt/>2 DAC clock cycles
• Proprietary low spurious and distortion design
• 6-carrier GSM ACLR = 79dBc at 200MHz IF, SFDR <gt/>85dBc (bandwidth = 300MHz) at zero IF
• Flexible 16bit LVDS interface, supports word and byte load
• Multiple chip synchronization, fixed latency and data generator latency compensation
• FIFO eases system timing, includes error detection, high performance, low noise PLL clock multiplier
• Digital inverse sinc filter
• 72 lead LFCSP-VQ package, operating temperature range from -40°C to +85°C

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party