ADATE318BCPZ

ADATE318 is a complete, single-chip ATE solution that performs the pin electronics functions of a driver, comparator, and active load (DCL), and a four quadrant per pin parametric measurement unit (PPMU). It has VHH drive capability per chip to support flash memory testing applications and integrated 16bit DACs with an on-chip calibration engine to provide all necessary dc levels for operation of the part. The driver features three active states: data high, data low, and terminate mode, as well as a high impedance inhibit state. The inhibit state, in conjunction with the integrated dynamic clamps, facilitates the implementation of a high speed active termination. The output voltage capability is -1.5V to +6.5V to accommodate a wide range of ATE and instrumentation applications. It is used in applications such as automatic test equipment, semiconductor test systems, board test systems, instrumentation and characterization equipment.

• 3-level driver with high-Z and reflection clamps, window and differential comparators
• ±25mA active load, per pin PPMU with -2V to +6.5V range
• Integrated 16bit DACs with offset and gain correction, 1.1W power dissipation per channel
• 3-level voltage range from -1.5V to +6.5V, precision trimmed output resistance
• Unterminated swing is 200mV minimum to 8V maximum
• Differential and single-ended window modes, 1.2GHz input equivalent bandwidth
• External sense input for system PMU, Go/no-go comparators
• Operating temperature is +25°C to +70°C
• Package style is 84-lead LFCSP

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party