LTC2861IGN#PBF

LTC2861 is a full duplex, low power, RS485/422 transceiver operating on 5V supplies. The driver features a logic-selectable low-EMI 250kbps operating mode, and maintains a high output impedance over the entire common mode range when disabled or when the supply is removed. Excessive power dissipation caused by bus contention or a fault is prevented by current limiting all outputs and by a thermal shutdown. Enhanced ESD protection allows the device to withstand ±15kV (human body model) on the transceiver interface pins without latch up or damage. It is widely used in application such as low power RS485/RS422 transceiver, level translator, backplane transceiver etc.

• Integrated, logic-selectable 120 ohm termination resistor
• Maximum data rate is 20Mbps minimum
• Guaranteed failsafe receiver operation over the entire common mode range
• Delayed micropower shutdown is 5µA maximum, high input impedance supports 256 nodes
• Power up/down glitch-free driver outputs
• Low operating current is 900µA maximum in receive mode
• Meets All TIA/EIA-485-A specifications
• Operating temperature is -40°C to 85°C
• Packaging style is 16-lead plastic SSOP

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party