MAX25210EVKIT#

MAX25210EVKIT# is a MAX25210 EV kit that is a fully assembled and tested PCB for evaluating the MAX25210 300mA LDO regulator. The EV kit accommodates TDFN 3mm x 3mm, TDFN 2mm x 2mm, and SO 5mm x 4mm package version of the product. The LDO regulator has a fixed 3.3V or 5V output, however, it can also be configured between 0.6V and 11V using an external resistive feedback divider network. An open-drain (active)RESET output changes from low to high whenever the OUTPUT voltage rises to 93.5% of its regulated output. When TIMEOUT is loaded with a 1000pF capacitor and OUTPUT exceeds its rising threshold voltage, (active) RESET remains low for the 1.25ms reset timeout period and then goes high. A dedicated SMB jack (50 ohm) is used for each package type to monitor the output and input voltage.

• EV kit operates from 3.5V to 36V and requires 300mA current
• Enables system designers to Meet Stringent Module Requirements for 100μA Quiescent Current
• Low 10μA quiescent current
• 300mA output-current capability (300mA, 200mA, 100mA and 50mA variants)
• User-selectable output voltage (3.3V/5V fixed and 0.6V to 11V adjustable)
• Tiny output capacitors reduce board space and BOM cost
• Stable Operation with 2.2μF Output Capacitor
• Fixed-reset threshold options: 87.5% or 93.5%
• Operates through cold-crank conditions

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party