MAX9295DGTM/V+T

MAX9295DGTM/V+T is a GMSL2 dual CSI-2 serializer with GMSL1 compatibility. It converts single- or dual-port MIPI CSI-2 data streams to GMSL2™ or GMSL1™ while sending and receiving control-channel data, enabling full-duplex single wire transmission of forward video and bidirectional control data over cables in excess of 15m in length. In GMSL2 mode, the device operates at a fixed rate of 3Gbps or 6Gbps in the forward direction and 187.5Mbps in the reverse direction. In GMSL1 mode, the MAX9295D can be paired with first-generation 3.12Gbps or 1.5Gbps GMSL1 deserializers or operate up to 4.5Gbps with GMSL2 deserializers configured for GMSL1 mode. Applications include co-located sensors, stereo camera, side mirror, radar, lidar.

• Dual 4-lane MIPI CSI-2 v1.3 ports
• Selectable GMSL2 at 3/6Gbps or backward compatible GMSL1 mode
• ASIL-relevant functional safety features (GMSL2)
• Concurrent side channel for device configuration and communication with peripherals
• Three internal and three external supply voltage monitors
• 50 ohm coax cable or 100 ohm STP, programmable spread spectrum for EMI reduction
• ADC supply current is 260µA typical at (ADC enabled, TA = 25°C)
• Supply current is 90mA typical at (VDD18, GMSL2 mode, TA = 25°C)
• SCL clock frequency is 400KHz maximum at (Mid fSCL range: (I²C-MST-BT = 101, I²C-SLV-SH = 01))
• Operating temperature range from -40°C to +105°C, 48-lead TQFN-SW-EP package

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party