MAX96711GTJ/V+

MAX96711GTJ/V+ is a 14bit GMSL serializer with high-immunity/bandwidth mode and coax/STP cable drive especially suited for automotive camera applications. In high bandwidth mode, the parallel-clock maximum is 116MHz for 12bit linear or combined HDR data types. Line-fault circuitry detects open/short faults on the link cable. The embedded control channel operates at 9.6Kbps to 1Mbps in UART, I²C, and mixed UART/I²C modes, allowing the programming of serializer, deserializer, and camera registers independent of video timing. For driving longer cables, the IC has programmable pre/deemphasis. A programmable spread spectrum is available on the serial output. The serial output meets ISO 10605 and IEC 61000-4-2 ESD standards. The core supply range is 1.7V to 1.9V, and the I/O supply range is 1.7V to 3.6V.

• High-immunity mode for robust control-channel EMC tolerance
• Retransmission of control data upon error detection, pre/deemphasis allows 15m cable at full speed
• High-speed data serialization for megapixel cameras, programmable output spread spectrum
• Crosspoint switch accepts any input bitmap, modes for encoded VSYNC and HSYNC
• Tracks spread spectrum applied at the parallel input, 1.7V to 3.6V I/O supply
• Dedicated GPO for camera frame-sync trigger and other uses, remote/local wake-up from sleep mode
• ±8kV contact and ±15kV air IEC 61000-4-2 and ISO 10605 ESD protection
• Single ended input current is +20µA maximum at (VDVDD = VAVDD = 1.7V to 1.9V)
• Power-down supply current is 15µA typical at (PWDNB = low, VDVDD = VAVDD = 1.7V to 1.9V)
• Operating temperature range from -40°C to +115°C, 32-pin TQFN-EP package

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party