P01191742D

C.A 742 IP2X is a low-voltage two-pole voltage absence tester. It is an essential tool for any electrician to check that no voltage is present before working on an electrical installation connected to the network. It complies with IEC 61243-3 Edition 3 and can be used to work on any indoor or outdoor 600V CAT IV installation. The C.A 742 is equipped with a redundant safety system in the event of power supply faults, the "ELV LED" which flashes whenever the voltage exceeds 50VAC / 120VDC. The full Autotest of the C.A 742 checks the electrical circuits, the power supply, the display and the condition of the measurement leads.

• Full integrated autotest
• Voltage testing up to 690VAC (16 2/3Hz - 800Hz)/750VDC
• Single-pole phase test
• Phase sequence testing up to 400Hz
• Continuity testing
• Removable test probe and cable

Contents

C.A 742 IP2X, 1 x black probe-holder lead 1.10m long, 1 x set of removable IP2X Ø 4mm test probes (1 red/1 black), 1 x wrist strap, 2 x 1.5V LR03/AAA batteries, 1 x user manual in 5 languages.