DM164120-5

The DM164120-5 is a PICkit 2 demonstration board for evaluating Microchip's PIC18J series of flash microcontrollers. It comes with populated PIC18F87J10 MCU. Programming is supported through a 6 pin header connection to a PICkit 2 microcontroller programmer (PG164120). The PIC18F87J10 MCU is preprogrammed with demonstration software which displays A/D results on the LEDs. On power up, the PIC18F87J10 will continuously display the current 8 most significant bits (MSbs) of the A/D result on the LEDs. Varying the potentiometer will change the value on the LEDs. Pressing switch S1 will change the mode to counting where the port connected to the LEDs is continuously incremented. Releasing switch S1 returns to the A/D result display.

• LEDs disabled through jumper JP2
• 32KHz crystal and load capacitors for timer1 operation
• Plug-in module (PIM) style mounting holes for connection to other boards
• External power connection through P2
• Enhanced ICD with 3 HW breakpoints
• 2V to 3.6V voltage range

Applications

Embedded Design & Development

Notes

90 Day Warranty only. After Expiration of Warranty returns must be processed via Microchip.