MCP3208T-BI/SL

MCP3208T-BI/SL is a 2.7V, 8-channel, successive approximation 12bit A/D converter with SPI serial interface and on-board sample and hold circuitry. The MCP3208 is programmable to provide four pseudo-differential input pairs or eight single-ended inputs. Differential nonlinearity (DNL) is specified at ±1LSB, while integral nonlinearity (INL) is offered in ±1LSB. Communication with the devices is accomplished using a simple serial interface compatible with the SPI protocol. The devices are capable of conversion rates of up to 100Ksps. The MCP3208 device operates over a broad voltage range (2.7V - 5.5V). Low current design permits operation with typical standby and active currents of only 500nA and 320µA, respectively. Applications include sensor interface, process control, data acquisition and battery operated systems.

• Analog inputs programmable as single-ended or pseudo-differential pairs
• On-chip sample and hold, SPI serial interface (modes 0,0 and 1,1)
• 100Ksps maximum sampling rate at VDD = 5V, 50Ksps maximum sampling rate at VDD = 2.7V
• Low power CMOS technology, 500nA typical standby current t(2µA max), 400µA max active current at 5V
• 12 clock cycles conversion time, 1.5 clock cycles analogue input sample time
• ±0.75LSB typical integral nonlinearity
• ±0.5LSB typical differential nonlinearity (no missing codes)
• ±1.25LSB typical offset error and ±1.25LSB typical gain error
• Operating voltage VDD range from 2.7V to 5.5V
• NSOIC-14 package, industrial temp range from -40°C to +85°C

Warnings

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.