You have entered a value in the highlighted fields below that contain invalid characters. Please revise your selection using valid characters only.

Product may not be an exact match for your search

You previously purchased this product. View in Order History



Programmer & Eraser, USB /Connectors /FRDM-KL25Z & Board, SBC Programming Socket Board


Image is for illustrative purposes only. Please refer to product description.

Manufacturer Part No:
Order Code:
  • Enter your custom part number in the textbox above
  • Maximum Part Numbers added.
    Delete older entries to add more.

Part Number Saved

Part Number Saved

Technical Datasheet:
KITFS26SKTEVM   Datasheet
Supply Frame Models Link
See all Technical Docs

Product Range Selector (FS26 Device Family)

See all from this product range

Product Overview

KITFS26SKTEVM is a FS26 safety SBC programming socket board. It provides easy customer configuration of the FS26 device family thanks to a LQFP48 socket. The KL25Z Freedom connected to the board, combined with the FS26 NXP GUI software allows to fully configure and control FS26 SBC. It's targeting 12V automotive applications. Devices can be easily placed on socket and allow OTP emulation, functional testing or program OTP (One Time Programming) fuses when ready. Typical applications include automotive, Battery Management System (BMS), body controller unit, Hybrid Electric Vehicle (HEV) applications and on-board charger.
  • VBAT power supply connectors (Jack and Phoenix)
  • LQFP48 burn in open-top socket and VPRE output 3.2V to 6.35V
  • VBOOST in independent mode or in front end topology to support battery cranking profiles
  • 0.8V to 3.3V VCORE output
  • LDO1 and LDO2, from 3.3V or 5.0V, up to 400mA
  • VTRK1 and VTRK2, from 3.3V or 5V, up to 125mA, VREF accuracy regulator for external ADC reference
  • FS0B, FS1b external safety pins, USB to SPI protocol for easy connection to software GUI
  • LEDs that indicate signal or regulator status and advance system monitoring via AMUX or external ADC
  • Manual or automated OTP fuse programming
  • Analog variable resistor to test external VMON


Assembled and tested evaluation board and pre-programmed FRDM-KL25Z microcontroller board in an anti-static bag, 3ft USB-STD A to USB-B-mini cable, Two connectors (terminal block plug, 2 pos., str. 3.81mm), Three connectors (terminal block plug, 3 pos., str. 3.81mm), Jumpers mounted on board and quick start guide.

Product Information

Find similar products Choose and modify the attributes above to find similar products.

Technical Documents (1)

Available for back order

More stock available to supplier lead times which is approximately 26/8/24

Due to market conditions delivery times are for general guidance only and may be subject to change at short notice

Notify me when back in stock


Pricing is unavailable. Please contact customer services.

Price for:
Multiple: 1 Minimum: 1
  • 1+
Quantity Price Your Price
1+ Rs.43,724.79
Promotional price
Contract Price
Web only price
Web only contract price
Quantity Price Your Price

Pricing is unavailable. Please contact customer services.

No longer stocked:: No Longer Manufactured::
Add to Basket Add to Basket Pre-Order
Restricted Item
Enter Your Line Note
Total Price:
Total Price: ( )
Total Price: --