ALED7709ATR
LED Driver, Synchronous Boost, 4 Output, 2.2 MHz, 0.2 Aout, AEC-Q100, 4.2 to 42 Vin, QFN-EP-24

| Manufacturer | STMICROELECTRONICS |
|---|---|
| Manufacturer Part No | ALED7709ATRCopy |
| Manufacturer Standard Lead Time | 41 weeks |
| Order Code | Re-Reel4176081RL Cut Tape4176081 |
| Your Part Number | |
| Technical Datasheet |
Notify me when back in stock
| Packaging Type | Quantity | Unit Price: | Total |
|---|---|---|---|
| Cut Tape | 1 | Rs.273.240 | Rs.273.24 |
| Total Price | Rs.273.24 | ||
| Quantity | Price |
|---|---|
| 1+ | Rs.273.240 |
| 10+ | Rs.186.300 |
| 50+ | Rs.176.750 |
| 100+ | Rs.167.200 |
| 250+ | Rs.158.600 |
| 500+ | Rs.154.780 |
| 1000+ | Rs.148.090 |
| 2500+ | Rs.143.310 |
Product Information
| Manufacturer | STMICROELECTRONICS |
|---|---|
| Manufacturer Part No | ALED7709ATRCopy |
| Manufacturer Standard Lead Time | 41 weeks |
| Order Code | Re-Reel4176081RL Cut Tape4176081 |
| Technical Datasheet | |
| Topology | Synchronous Boost |
| LED Driver Type | - |
| Input Voltage Min | 4.2V |
| Input Voltage Max | 42V |
| Output Voltage Max | 40V |
| Output Current Max | 200mA |
| Switching Frequency Typ | 2.2MHz |
| IC Mounting | Surface Mount |
| IC Case / Package | QFN-EP |
| No. of Pins | 24Pins |
| Operating Temperature Min | -40°C |
| Operating Temperature Max | 150°C |
| Product Range | - |
| Qualification | AEC-Q100 |
| SVHC | No SVHC (25-Jun-2025) |
| Automotive Qualification Standard | AEC-Q100 |
| Device Topology | Synchronous Boost |
| Driver Case Style | QFN-EP |
| No. of Outputs | 4Outputs |
| Switching Frequency | 2.2MHz |
Product Overview
ALED7709ATR is an automotive-grade (AEC-Q100 grade1 qualified) LED driver combining a boost/SEPIC controller and four low-side constant-current sinkers, designed to drive strings of high-brightness LEDs. The switching converter section provides the supply rail for the LED strings, whose value is constantly optimized for maximum efficiency. The boost/SEPIC controller supports the external synchronization and spread spectrum. It can work simultaneously or exclusively in standalone mode (SAM), controlled only by PWMI signal, and in bus-driven mode (BDM) through an I2C serial interface. The brightness of the four LED strings can be controlled either in global or local mode. In global mode, this supports a mixed PWM and analogue dimming to improve the brightness range capability. Typical applications are automotive lighting and backlighting for:cluster/infotainment display, head-up display (HUD), instrument lighting system, ambient light.
- Operating temperature range from -40°C <lt/> TJ <lt/> 150°C
- 4.5V to 42V operating input voltage range
- Up to 60V tolerant for load dump at 24V battery, supports battery cranking events down to 4V supply
- Simultaneous or exclusive control by PWMI and I²C interface
- Fixed frequency peak current-mode controller, cycle-by-cycle power switch OCP
- Synchronized boost and SEPIC topologies support, input overvoltage/output short-circuit protection
- 4 x 40V rated constant current outputs, adjustable up to 200mA per channel
- Selectable channels phase-shifting and adjustable rise/fall time for reducing EMI
- QFN24L 0.65mm pitch small package
- 100Hz to 12.8KHz dimming frequency, dimming ratio 10000:1 at 100Hz
Technical Specifications
| Topology | Synchronous Boost |
|---|---|
| Input Voltage Min | 4.2V |
| Output Voltage Max | 40V |
| Switching Frequency Typ | 2.2MHz |
| IC Case / Package | QFN-EP |
| Operating Temperature Min | -40°C |
| Product Range | - |
| SVHC | No SVHC (25-Jun-2025) |
| Device Topology | Synchronous Boost |
| No. of Outputs | 4Outputs |
| LED Driver Type | - |
|---|---|
| Input Voltage Max | 42V |
| Output Current Max | 200mA |
| IC Mounting | Surface Mount |
| No. of Pins | 24Pins |
| Operating Temperature Max | 150°C |
| Qualification | AEC-Q100 |
| Automotive Qualification Standard | AEC-Q100 |
| Driver Case Style | QFN-EP |
| Switching Frequency | 2.2MHz |
Technical Docs (1)
Associated Products
1 Product Found
Legislation and Environmental
| Country of Origin: Country in which last significant manufacturing process was carried outCountry of Origin: | Thailand Country in which last significant manufacturing process was carried out |
|---|---|
| Tariff No: | 85411000 |
| US ECCN: | EAR99 |
| EU ECCN: | NLR |
| RoHS Compliant: | Yes RoHS |
| RoHS Phthalates Compliant: | Yes RoHS |
| SVHC: | No SVHC (25-Jun-2025) |
| Download Product Compliance Certificate | Product Compliance Certificate |
| Weight (kg): | .000001 |
