STM32F303ZET6

STM32F303ZET6 is a STM32 F3 series mainstream mixed signals 32-bit microcontroller (MCU). It is based on high-performance ARM® Cortex®-M4 32-bit RISC core with FPU operating at a frequency of 72MHz, and embedding a floating point unit (FPU), a memory protection unit (MPU) and an embedded trace macrocell (ETM). The family incorporates high-speed embedded memories, a flexible memory controller (FSMC) for static memories (SRAM, PSRAM, NOR, NAND), and an extensive range of enhanced I/Os and peripherals connected to an AHB and dual APB buses. The device offers 40-ch 4 fast 12-bit ADCs, seven comparators, four operational amplifiers, two DAC channels, a low-power RTC, up to 5 general-purpose 16-bit timers, 1 general-purpose 32-bit timer, and up to 3 timers advanced control. It also feature standard and advanced communication interfaces: up to 3 I2Cs, 4 SPIs (2 I2Ss), 3 USARTs, 2 UARTs, CAN and USB. To achieve audio class accuracy, the I2S peripherals can be clocked via an external PLL.

• ARM® Cortex®-M4 CPU w/ FPU, single-cycle multiplication, HW division, 90 DMIPS, DSP instruction, MPU
• 64Kbytes SRAM on data bus, 16Kbytes CCM (core coupled memory) RAM, 512Kbytes of Flash memory
• 2 to 3.6V VDD, VDDA voltage, POR/PDR, PVD and VBAT supply for RTC and backup registers
• 4 to 32MHz crystal oscillator, 32kHz oscillator for RTC w/ calibration and internal 40kHz oscillator
• Interconnect matrix
• Calendar RTC with alarm, periodic wakeup from stop/standby
• SWD, Cortex®-M4 with FPU ETM, JTAG
• 96-bit unique ID
• CRC calculation unit
• 144 pin LQFP package and temperature range from -40 to 85°C